Lithium battery freight focus Air · Sea · Land assessment Document-first planning
Shipment Status & Support

Europe · sea freight from Shenzhen

Shipping from Shenzhen to Sundsvall

Shenzhen to Sundsvall

South China Sea · Malacca Strait · Indian Ocean · Bab-el-Mandeb · Suez Canal · Strait of Gibraltar · English Channel · Danish Straits

Sea corridor illustration: Shenzhen to Sundsvall, Sweden Simplified map with a curved corridor from Shenzhen via South China Sea, Malacca Strait, Indian Ocean, Bab-el-Mandeb, Suez Canal, Strait of Gibraltar, English Channel, Danish Straits to Sundsvall. Illustration only; not a vessel track or schedule. CHINAINDIAAFRICAEUROPERUSSIAINDIAN OCEANNORTH ATLANTICPACIFIC OCEAN Singapore / MalaccaBab-el-MandebSuez CanalGibraltarDanish Straits ShenzhenCHINA ORIGIN SundsvallSWEDEN ShenzhenSOUTH CHINA SEAGUANGDONGDEPARTURE AREA
  1. ShenzhenChina origin
  2. South China Sea
  3. Malacca Strait
  4. Indian Ocean
  5. Bab-el-Mandeb
  6. Suez Canal
  7. Strait of Gibraltar
  8. English Channel
  9. Danish Straits
  10. SundsvallSweden
Geographic corridor illustration only, not a vessel track, port-call list or sailing schedule. The loading terminal, carrier, transshipment and dates are confirmed per shipment.

From Shenzhen to Sundsvall, cargo moves from Dongguan and Shenzhen factories via Yantian, crosses a Suez-or-Cape voyage that ends with the Danish straits and the Baltic, and is discharged at the port of Sundsvall.

Sweden has required producer registration with Naturvårdsverket since January 2026. Below are 5 route-specific points to plan for, what we do about each, and the documents to have ready before booking.

What we need to start

  • Yantian / Shekou export
  • Typhoon season Jun–Oct
  • Consignee EORI
  • EU declaration of conformity
  • Naturvårdsverket registration

Route profile

What sets Shenzhen → Sundsvall apart

Sea corridor

Asia – Baltic via the Danish straits

The Baltic is reached only through the Danish straits, where deep-draught ships are advised to take pilots, and its northern ports set ice-class restrictions every winter.

Import country

Sweden

Registration with Naturvårdsverket since January 2026 under Ordinance 2025:813, and the EU-wide battery and ICS2 duties.

Yantian port area in Shenzhen seen from the hills, with container berths along the bay
A loaded container ship on the horizon

Where this route gets difficult

5 points to plan for on the Shenzhen → Sundsvall route

They run from the Shenzhen terminal through the voyage to Sundsvall and the Sweden import file.

  1. Origin port

    Typhoon season squeezes Shenzhen cut-offs

    The Hong Kong Observatory puts the regional tropical cyclone season from June to October, busiest July to September. DG containers need their MSA filings approved and a signed packing certificate before loading, so a closed gate or a rolled vessel in typhoon weeks can push the whole document chain to a new sailing.

    What Anxin does: From June to October we build slack into the stuffing date, confirm the DG cut-off with the carrier the week before loading, and resubmit filings promptly if the vessel changes.

  2. Sea corridor

    Through the Danish straits, possibly on a feeder

    Cargo for Sundsvall has to pass the Danish straits. IMO recommends pilots on Route T for ships of 11 m draught or more, and the Danish Maritime Authority reports ships that ignore the recommendation to their flag state. Whether the box stays on one vessel or is transhipped onto a feeder at a North Sea port, each vessel has to accept the UN numbers.

    What Anxin does: We ask the carrier to name any transhipment port and the feeder operator on the booking and confirm DG acceptance for that leg as well as the mainline.

  3. Import country

    CE marking and a declaration of conformity in the right language

    The importer in Sweden carries the check: CE marking on the battery and an EU declaration of conformity, translated into the language Sweden asks for, have both been required since 18 August 2024 for batteries entering the EU market.

    What Anxin does: We ask the manufacturer in China for the declaration of conformity and a photo of the CE marking on the battery or its packaging before loading, and pass them to the Sweden importer. We check that the documents exist and match the goods; we do not assess conformity.

  4. Import country

    Naturvårdsverket registration since January 2026

    Sweden's supplementary ordinance to the Battery Regulation (SFS 2025:813) has required battery producers to be registered with Naturvårdsverket since 1 January 2026. A producer responsibility organisation such as El-Kretsen can help with the filing, but the data remain the producer's responsibility.

    What Anxin does: We ask the Swedish importer to confirm the registration is in place before booking, and pass on battery chemistry and weight data it may need for reporting.

  5. Import country

    The importer's name and address on the battery

    The Battery Regulation asks the importer to put its own name, registered trade name or trade mark and postal address, with a single contact point, on the battery. Only when the battery's size or nature makes that impossible may the details move to the packaging or an accompanying document, so a Sweden importer's details need to reach the factory before printing.

    What Anxin does: We pass the Sweden importer's name and address block to the manufacturer before the goods are packed in China and check carton or battery photos for it before loading.

Locator map of Sundsvall, SwedenSundsvall
Locator map in the same projection as the corridor map; the dot marks the listed port position (62.38°N, 17.35°E).
Close view of stacked blue and red shipping containers at the Port of Rotterdam

Documents & compliance

Documents to line up for Shenzhen → Sundsvall

Anxin reviews documents supplied by the shipper, manufacturer and importer; it does not issue test reports, safety data sheets or import certificates.

Before loading in Shenzhen

  • Confirmation from the carrier of the DG cut-off at Yantian or Shekou, rechecked in typhoon weeks
  • Customs packaging use-appraisal result for the dangerous goods packaging (with the maker's performance appraisal)
  • Container packing certificate signed by a certified packing inspector after supervised stuffing
  • Transport-condition classification report where applicable
  • Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)

For the shipping line

  • Transhipment port, feeder operator and feeder DG acceptance named on the booking
  • UN 38.3 test summary for every cell and battery type
  • Dangerous goods declaration with UN number (3480 / 3481 / 3090 / 3091), proper shipping name and packing instruction (P903, or P908/P911 for damaged)

For the importer in Sweden

  • Naturvårdsverket registration of the Swedish producer
  • Haulier in Sweden briefed with UN number, class 9 and tunnel code (E) for the road leg
  • Label and QR-code status against the August 2026 and February 2027 dates
A portable power bank connected to a smartphone
Before you book

Send the file once, complete

Most delays on this route start with a document that exists but does not match: a UN number, a model name or a package count that differs between the Shenzhen filings, the carrier booking and the Sweden import file. We check the three against each other before the booking is confirmed.

Carriers we book with

Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.

Risk & mitigation

Risk table for Shenzhen → Sundsvall

RiskWhereMitigationWho acts
Typhoon closes terminals or delays the vessel after filings are madeYantian / Shekou, Jun–OctSlack in stuffing date; refile quickly on vessel changeAnxin with the declarant
Feeder operator does not accept the UN numbersNorth Sea hubDG acceptance for the feeder leg confirmedAnxin with the carrier
Producer not yet registered with NaturvårdsverketImporter in SwedenRegistration confirmed before bookingImporter
Declaration of conformity missing or not in the required languageImporter in SwedenDeclaration and CE photo collected before loadingManufacturer / importer

Questions

Shenzhen → Sundsvall: questions we are asked

Yes. Since 1 January 2026 producers, which includes importers placing batteries on the Swedish market, must be registered with Naturvårdsverket under Ordinance 2025:813.

Yes, but in the restriction period only ships of the required ice class and deadweight receive icebreaker assistance. Finland's agency publishes the restrictions on baltice.org, with exemption requests due at least three working days before arrival.

Since September 2026 Dongguan Customs and Dongguan MSA share dangerous-goods packaging certificate data and act jointly against false declarations, so the packaging certificate and the MSA filing should match exactly.

Next step

From enquiry to import

  1. 1EnquiryCargo, origin, destination
  2. 2Documents checkUN 38.3, SDS, packing
  3. 3BookingAfter carrier acceptance
  4. 4HandoverAt Shenzhen
  5. 5ImportClearance at Sundsvall
Each step is confirmed in writing; an enquiry does not create a booking.

Ask about Shenzhen → Sundsvall

Origin and destination are filled in; add the cargo facts you have.

Sending this form starts a review; it does not confirm carriage. Full enquiry form

After you send it

We check carrier acceptance for Shenzhen → Sundsvall before any booking, and ask for missing battery documents first.

All destinations from Shenzhen · Sweden ports

Workers loading cartons from pallets by hand in a warehouse

Need Shenzhen → Sundsvall reviewed?

Share the cargo facts; we review the route in writing.

Request a Quote
Request a Quote WhatsApp