Shenzhen (Yantian / Shekou)
Pearl River Delta battery cargo, often stuffed at factories in Dongguan or Huizhou, exported through Yantian or Shekou, with a typhoon season from June to October.
Europe · sea freight from Shenzhen
Shipping from Shenzhen to Dieppe
Shenzhen to Dieppe
South China Sea · Malacca Strait · Indian Ocean · Bab-el-Mandeb · Suez Canal · Strait of Gibraltar · Celtic Sea · English Channel
- ShenzhenChina origin
- South China Sea
- Malacca Strait
- Indian Ocean
- Bab-el-Mandeb
- Suez Canal
- Strait of Gibraltar
- Celtic Sea
- English Channel
- DieppeFrance
From Shenzhen to Dieppe, cargo moves out of Shenzhen's Yantian and Shekou terminals, crosses a voyage that may run through Suez as drawn or round the Cape, depending on the service, and is discharged at the port of Dieppe.
The French side checks the producer's unique identifier (IDU) as well as the EU battery rules. Below are 5 route-specific points to plan for, what we do about each, and the documents to have ready before booking.
What we need to start
- Yantian / Shekou export
- Typhoon season Jun–Oct
- French-language safety information
- Consignee EORI
- EU declaration of conformity
Route profile
What sets Shenzhen → Dieppe apart
France
An IDU from SYDEREP for the batteries stream, eco-organisme membership now required for every battery category, and the EU-wide CE and label duties.
Where this route gets difficult
5 pain points from Shenzhen to Dieppe
Loading port first, then the sea leg, then Dieppe and the France market.
- Origin port
Factory stuffing in Dongguan, loading at Yantian: avoid a second opening
Much Shenzhen battery export is stuffed inland and trucked to the terminal. In May 2026 Yantian MSA and Dongguan MSA ran a cross-regional 'one-box' pilot: four battery containers were inspected jointly at the Dongguan factory and loaded at Yantian without being opened again. It shows that the inspection record made at the factory is what matters at the terminal.
What Anxin does: We ask at booking whether your factory and the terminal's MSA office can use the one-box arrangement, and we have stuffing photos, the packing certificate and the DG declaration match exactly, so the container is not held for re-inspection.
- Sea corridor
Cape waters saw about a third of 2024's container losses
Round-Africa routing puts battery containers through South African waters. Of the 576 containers the World Shipping Council recorded as lost at sea in 2024, the South African Maritime Safety Authority estimates about 200, roughly 35%, went overboard near the Cape. In August 2024 alone, SAMSA reported 99 boxes lost from the CMA CGM Belem off Richards Bay and 46 from the MSC Antonio off Port St Johns in wintry weather.
What Anxin does: When the booking goes via the Cape, we apply the CINS stuffing checks (gaps, blocking, wall clearance) more strictly and ask for photos at every stage of packing.
- Import country
CE marking and a declaration of conformity in the right language
Since 18 August 2024 a battery sold in the EU needs the CE marking and an EU declaration of conformity from its manufacturer. The declaration has to be available in the language France requires, and the importer is the one who must check both before the goods are released for sale.
What Anxin does: We ask the manufacturer in China for the declaration of conformity and a photo of the CE marking on the battery or its packaging before loading, and pass them to the France importer. We check that the documents exist and match the goods; we do not assess conformity.
- Import country
The ICS2 entry summary is due before loading in Shenzhen
For Dieppe, EU security pre-filing happens at the other end of the voyage: the ICS2 entry summary must reach the system 24 hours before the container is loaded in Shenzhen. No filing means no loading, and a missing EORI number is enough to reject it.
What Anxin does: We collect the consignee's EORI number, an HS-level goods description and the house-bill parties at booking, and make sure the party filing the ENS has them before the Shenzhen cut-off.
- Import country
The importer's name and address on the battery
The Battery Regulation asks the importer to put its own name, registered trade name or trade mark and postal address, with a single contact point, on the battery. Only when the battery's size or nature makes that impossible may the details move to the packaging or an accompanying document, so a France importer's details need to reach the factory before printing.
What Anxin does: We pass the France importer's name and address block to the manufacturer before the goods are packed in China and check carton or battery photos for it before loading.
Documents & compliance
Checklist for Shenzhen → Dieppe
These documents come from the shipper, the manufacturer and the importer. Anxin checks them against each other; it does not issue test reports, safety data sheets or import certificates.
In Shenzhen, before the box is loaded
- Confirmation from the carrier of the DG cut-off at Yantian or Shekou, rechecked in typhoon weeks
- Container packing certificate signed by a certified packing inspector after supervised stuffing
- Transport-condition classification report where applicable
- Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)
- EU declaration of conformity and CE marking photo from the manufacturer
For the carrier and the voyage
- Routing (Suez or Cape of Good Hope) and any transhipment port stated on the booking confirmation
- Condition statement: new, used, damaged/defective (SP376) or for recycling (SP377)
- Consignee EORI and HS-level description to the ENS filer before loading
At the France end
- Haulier in France briefed with UN number, class 9 and tunnel code (E) for the road leg
- Batteries-stream IDU of the producer of record in France
Before you book
Send the file once, complete
Most delays on this route start with a document that exists but does not match: a UN number, a model name or a package count that differs between the Shenzhen filings, the carrier booking and the France import file. We check the three against each other before the booking is confirmed.
Carriers we book with
Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.
Risk & mitigation
What could go wrong from Shenzhen to Dieppe, and who acts
| Risk | Where | Mitigation | Who acts |
|---|---|---|---|
| Container reopened at the terminal because records do not match | Factory → Yantian | Photos, packing certificate and DG declaration cross-checked before trucking | Anxin |
| Heavy weather off South Africa | Cape of Good Hope | CINS stuffing and blocking checks before sealing | Packing site, checked by Anxin |
| Declaration of conformity missing or not in the required language | Importer in France | Declaration and CE photo collected before loading | Manufacturer / importer |
| ENS not filed and the box is refused at loading | Loading port, Shenzhen | EORI and house-bill data passed to the filer at booking | Filer (carrier / forwarder) |
Questions
Shenzhen → Dieppe: questions we are asked
Yes. Since 18 August 2025 all battery categories, industrial and EV included, must be covered by an approved eco-organisme or an approved individual system.
It depends on the service. In September 2026 most Asia–North Europe capacity still sailed round the Cape of Good Hope; Sea-Intelligence put the Red Sea share for North Europe vessels at 27%. We ask the carrier to confirm the routing on the booking and quote each routing separately.
Yes, provided a certified packing inspector supervises the stuffing and signs the container packing certificate. Since May 2026 Yantian and Dongguan MSA have also piloted joint factory inspection so the container can be loaded at Yantian without reopening; we check whether your shipment can use it.
References
Regulations and port sources cited
- Identifiant unique (IDU) des filières REP (ADEME, Filières REP)
- Filière REP Batteries (BAT) (ADEME, Filières REP)
- Regulation (EU) 2023/1542 on batteries and waste batteries (ELI) (EUR-Lex / Publications Office of the EU)
- ICS2 Release 3: Prepare your business for sending goods to or via the EU by sea and inland waterways (European Commission, DG TAXUD (leaflet KP0423828ENN))
- Regulation (EU) 2023/1542 concerning batteries and waste batteries (Official Journal PDF) (EUR-Lex / Publications Office of the EU)
- Inland transport of dangerous goods (summary of Directive 2008/68/EC) (EUR-Lex)
- Search on for containers lost overboard off South Africa's Indian Ocean coast (South African Maritime Safety Authority)
- Yantian MSA runs 'one-box' model for lithium battery sea exports (Chinese), 8 May 2026 (Shenzhen Development and Reform Commission (source: Shenzhen MSA))
- Forecasting yearly number of tropical cyclones affecting Hong Kong (tropical cyclone season June–October, most active July–September) (Hong Kong Observatory)
Next step
From enquiry to import
- 1EnquiryCargo, origin, destination
- 2Documents checkUN 38.3, SDS, packing
- 3BookingAfter carrier acceptance
- 4HandoverAt Shenzhen
- 5ImportClearance at Dieppe
Prefer chat? Chat on WhatsApp (+86 151 4514 5178)
After you send it
We check carrier acceptance for Shenzhen → Dieppe before any booking, and ask for missing battery documents first.
All destinations from Shenzhen · France ports
Need Shenzhen → Dieppe reviewed?
Share the cargo facts; we review the route in writing.
Request a Quote