Lithium battery freight focus Air · Sea · Land assessment Document-first planning
Shipment Status & Support

Europe · sea freight from Tianjin

Shipping from Tianjin to Oxelosund

Tianjin to Oxelosund

Bohai Sea · Bohai Strait · Malacca Strait · Bab-el-Mandeb · Suez Canal · Strait of Gibraltar · English Channel · Danish Straits

Sea corridor illustration: Tianjin to Oxelosund, Sweden Simplified map with a curved corridor from Tianjin via Bohai Sea, Bohai Strait, Malacca Strait, Bab-el-Mandeb, Suez Canal, Strait of Gibraltar, English Channel, Danish Straits to Oxelosund. Illustration only; not a vessel track or schedule. CHINAINDIAAFRICAEUROPERUSSIAINDIAN OCEANNORTH ATLANTIC Singapore / MalaccaBab-el-MandebSuez CanalGibraltarDover Strait TianjinCHINA ORIGIN OxelosundSWEDEN TianjinBOHAI SEAYELLOW SEASHANDONGDEPARTURE AREA
  1. TianjinChina origin
  2. Bohai Sea
  3. Bohai Strait
  4. Malacca Strait
  5. Bab-el-Mandeb
  6. Suez Canal
  7. Strait of Gibraltar
  8. English Channel
  9. Danish Straits
  10. OxelosundSweden
Geographic corridor illustration only, not a vessel track, port-call list or sailing schedule. The loading terminal, carrier, transshipment and dates are confirmed per shipment.

This route runs out of Tianjin's Xingang terminals, where customs can supervise stuffing at the factory and the box goes straight to the ship on a booked slot, then follows a long Europe voyage extended through the Danish straits into the Baltic; at the far end is the port of Oxelosund.

Sweden has required producer registration with Naturvårdsverket since January 2026. The 5 points below are particular to this lane; each comes with what we do and the paperwork it touches.

What we need to start

  • Tianjin Xingang export
  • Factory-supervised loading
  • Swedish-language safety information
  • Consignee EORI
  • EU declaration of conformity

Route profile

The Tianjin → Oxelosund route in brief

Origin port

Tianjin (Xingang)

North China's main container gateway, where Tianjin Customs lets DG containers be inspected at the factory and loaded on arrival within a booked port slot, and where the Bohai Bay freezes at its edges in mid-winter.

Sea corridor

Asia – Baltic via the Danish straits

The Baltic is reached only through the Danish straits, where deep-draught ships are advised to take pilots, and its northern ports set ice-class restrictions every winter.

Container gantry cranes at a Tianjin port container terminal
A loaded container ship on the horizon

Where this route gets difficult

Where Tianjin → Oxelosund shipments get held up: 5 points

In the order the cargo meets them: at the loading port, at sea, at Oxelosund and at customs in Sweden.

  1. Origin port

    Winter ice at the Haihe mouth

    Sea ice forms every winter in the Bohai Sea, and the Haihe estuary at Tianjin is among the severe areas. In winter 2021/22 China's national marine forecast centre expected the peak ice period from mid-January to mid-February, with floating ice reaching about 5 nautical miles out in Bohai Bay. Ice and cold spells slow port operations around the Chinese New Year shipping peak.

    What Anxin does: For January and February sailings from Tianjin we add slack between stuffing and the DG cut-off and confirm the vessel's berthing window with the carrier the week before loading.

  2. Sea corridor

    The Asia leg decides Suez or the Cape

    Up to the Danish straits the voyage matches North Europe's: Sea-Intelligence put Red Sea routing at 27% for North Europe services in September 2026, so most containers still sail round the Cape of Good Hope, where SAMSA estimates about 35% of the containers lost in 2024 went overboard.

    What Anxin does: We quote the Suez and Cape routings separately when both are offered and apply the CINS stuffing checks strictly on Cape sailings.

  3. Import country

    The ICS2 entry summary is due before loading in Tianjin

    For Oxelosund, EU security pre-filing happens at the other end of the voyage: the ICS2 entry summary must reach the system 24 hours before the container is loaded in Tianjin. No filing means no loading, and a missing EORI number is enough to reject it.

    What Anxin does: We collect the consignee's EORI number, an HS-level goods description and the house-bill parties at booking, and make sure the party filing the ENS has them before the Tianjin cut-off.

  4. Import country

    Safety information in a language Sweden accepts

    An importer has to ensure that batteries are accompanied by instructions and safety information in a language that end-users in Sweden can easily understand, as the Member State determines. Inserts and carton print are much simpler to adjust before packing in China.

    What Anxin does: We ask the importer which language Sweden requires and check carton and insert photos against it before loading.

  5. Import country

    User-replaceable batteries in appliances from 18 February 2027

    Article 11 of the Battery Regulation says that from 18 February 2027 portable batteries inside appliances must be readily removable and replaceable by the end-user using commercially available tools, without heat or solvents, except under limited derogations. Appliances sold in Sweden after that date need a design that complies.

    What Anxin does: When appliances with built-in batteries are booked for Sweden we point the importer to the February 2027 date so the manufacturer answers the design question before shipment; we do not assess compliance.

Locator map of Oxelosund, SwedenOxelosund
Locator map in the same projection as the corridor map; the dot marks the listed port position (58.67°N, 17.12°E).
Close view of stacked blue and red shipping containers at the Port of Rotterdam

Documents & compliance

What to have ready: Tianjin to Oxelosund

These documents come from the shipper, the manufacturer and the importer. Anxin checks them against each other; it does not issue test reports, safety data sheets or import certificates.

In Tianjin, before the box is loaded

  • Safety data sheet and dangerous goods safe-carriage declaration for the MSA cargo report
  • Customs packaging use-appraisal result for the dangerous goods packaging (with the maker's performance appraisal)
  • Container packing certificate signed by a certified packing inspector after supervised stuffing
  • Transport-condition classification report where applicable
  • Load plan showing even weight distribution (no more than 60% of the cargo weight in either half of the container length)

For the carrier and the voyage

  • Transhipment port, feeder operator and feeder DG acceptance named on the booking
  • Lithium battery mark (SP188 cargo) or class 9 labels and placards
  • Condition statement: new, used, damaged/defective (SP376) or for recycling (SP377)

For import into Sweden

  • Instructions and safety information in the language Sweden requires
  • Haulier in Sweden briefed with UN number, class 9 and tunnel code (E) for the road leg
  • Naturvårdsverket registration of the Swedish producer
An electric bicycle with its battery mounted on the frame
Before you book

One consistent file

A document that is present but inconsistent holds a booking as surely as a missing one: the UN number, model name or carton count reads differently in the Tianjin export filings, the carrier booking and the Sweden import papers. We compare all three before confirming space.

Carriers we book with

Our booking panel; availability on this lane and acceptance of the declared UN numbers are confirmed for each booking. It does not mean that a listed carrier runs a direct service on this route. Carrier choice depends on the trade lane, cargo classification and each carrier's dangerous-goods acceptance at booking. The final carrier is confirmed on the booking.

Risk & mitigation

What could go wrong from Tianjin to Oxelosund, and who acts

RiskWhereMitigationWho acts
Ice or cold spell slows berthing in mid-winterBohai Bay, Jan–FebSlack between stuffing and cut-off; berthing window reconfirmedCarrier, monitored by Anxin
ENS not filed and the box is refused at loadingLoading port, TianjinEORI and house-bill data passed to the filer at bookingFiler (carrier / forwarder)

Questions

Tianjin → Oxelosund: questions we are asked

Yes. Since 1 January 2026 producers, which includes importers placing batteries on the Swedish market, must be registered with Naturvårdsverket under Ordinance 2025:813.

Yes, but in the restriction period only ships of the required ice class and deadweight receive icebreaker assistance. Finland's agency publishes the restrictions on baltice.org, with exemption requests due at least three working days before arrival.

Tianjin Customs offers a 'supervised factory loading, direct loading on port arrival' model: stuffing is supervised at the factory, the box enters the port in a booked slot and is loaded directly. Whether a given shipment can use it depends on the customs arrangement for the exporter and the port slot; we check both when you book.

Next step

From enquiry to import

  1. 1EnquiryCargo, origin, destination
  2. 2Documents checkUN 38.3, SDS, packing
  3. 3BookingAfter carrier acceptance
  4. 4HandoverAt Tianjin
  5. 5ImportClearance at Oxelosund
Each step is confirmed in writing; an enquiry does not create a booking.

Ask about Tianjin → Oxelosund

Origin and destination are filled in; add the cargo facts you have.

Sending this form starts a review; it does not confirm carriage. Full enquiry form

After you send it

We check carrier acceptance for Tianjin → Oxelosund before any booking, and ask for missing battery documents first.

All destinations from Tianjin · Sweden ports

Workers loading cartons from pallets by hand in a warehouse

Need Tianjin → Oxelosund reviewed?

Share the cargo facts; we review the route in writing.

Request a Quote
Request a Quote WhatsApp